CAPACITY :
Center height
6.1/2″ – 165 MM
Swing over bed
12″ – 305 MM
Swing over Cross slide
7″ – 180 MM
Swing in Gap
20″ – 500 MM
BED :
Bed length
Admit Between Center
LDGH – 1 (4′ – 6″ – 1370 MM)
29″ – 730 MM
LDGH – 2 (6′ – 0″ – 1830 MM)
47″ – 1190 MM
Bed type
2 V & 2 Flat
Bed Width
9.1/2″ – 240 MM
Length of Gap in front of face Plate
4.1/2″ – 115 MM
HEAD STOCK :
Number of Spindle Speed
8
Range of Spindle Speed
65 to 1350 RPM
Spindle Bore
1.1/2″ – 38 mm

Spindle Nose
A 2 Size 4
Spindle Morse Taper (Inside)
MT – 3
CARRIAGE & COMPOUND :
Cross Slide Dimension
6″ – 150 mm x 14″-355 mm
Cross Slide Travel
5.1/4″ – 135 MM
Compound Slide Dimension
4” – 100 mm x 8.3/4”-222 mm
Compound Slide Travel
4.1/2″ – 115 mm
Tool post square
4″ – 100 mm
Tool Shank Section
3/4″ – 19 mm x 3/4″ – 19 mm
TAIL STOCK :
Spindle Diameter
1.1/2″ – 38 mm
Spindle Travel
5″ – 127 mm
Spindle Morse Taper
MT – 3
THREADS :

Number of Threads Range in Metric (mm)
20
Number of Pitch Range in Metric (mm)
0.5 to 7.5 mm
Number of Threads Range in British (inch)
36
Number of pitch Range in British (inch)
4 to 60 TPI
Lead Screw Diameter
1″ – 25.4 mm
Lead Screw Threads
4 TPI
Electrical :
Motor recommended
2 H.P / 1.5 KW

Special Features

  • Induction harden bed ways.
  • Bed is made from high quality cast iron & strictly inspected with Micro level & straight edge.
  • Headstock spindle & shafts are made from high tensile steel duly hardened & ground.
  • Headstock gear are made from high tensile steel duly hardened & ground.
  • Tail stock spindle is hardened & ground, made from alloy steel.
  • Norton and Apron Gear Box is totally enclosed oil bath system.
  • Meticulous care is taken in selecting the right raw material for every component. Each & every component is passed
  • through strict quality control.
  • Machine accuracy is tested as per IS : 1878 (Part – I) 1971.

Standard Accessories:

Chuck back plate, Tool Post Spanner, Centre adapter, Dead centers – 2 nos, Full Norton gear box, Electric motor, Motor V-belt, Switch.

Optional Accessories:

Face plate, Steady rest, Follow rest, Carrier plate, Rear tool post with extended cross slide, Quick change tool post with tool holder, Taper turning attachment, Machine lamp, Electric control panel, Switch shaft, Foot brake, Coolant pump with tank, Rear splash guard, Dog chuck, True chuck, Revolving centre.