CAPACITY: Standard
Center height 16” – 405 mm
Optional
Center height 18” – 455 mm
Center height
16” -405mm 18” -455mm
Swing over bed
30” -460mm 34” -865mm
Swing over Cross slide
20” -500mm 24” -610mm
Swing in gape
46” -1170mm 50” -1270mm
BED :
Bed Lengh
Admit Between Center
HI-CUT-1 (7’-0” – 2235 mm)
31” – 800 mm
HI-CUT-2 (9’-0” – 2745 mm)
54” -1370 mm
HI-CUT-3 (10’-0” – 3050 mm)
66” -1680 mm
HI-CUT-4 (12’-0” – 3660 mm)
90” -2280 mm
HI-CUT-5 (14’-0” – 4270 mm)
114” -2900 mm
HI-CUT-6 (16’-0” – 4875 mm)
138” -3500 mm
HI-CUT-7 (18’-0” – 5485 mm)
162” -4100 mm
HI-CUT-8 (20’-0” – 6100 mm)
186” -4700 mm
HI-CUT-9 (22’-0” – 6700 mm)
210” -5300 mm
HI-CUT-10 (24’-0” – 7300 mm)
234” -5900 mm
HI-CUT-11 (26’-0” – 8000 mm)
258” -6550 mm
HI-CUT-11 (28’-0” – 8500 mm)
282” -7150 mm
Bed type
2V & 2 Flat
Bed width
18” -455 mm
Lenght of gape in front of face plate
10”- 250 mm
HEAD STOCK :
Number of spindle speed
8
Range of spindle speed
30 to 250 RPM
Spindle nose dia.
4” -100 mm
Spindle bore
3.1/8” -80 mm
Spindle threads
6 TPI
Spindle morse taper (Inside)
MT – 4
CARRIAGE & COMPOUND :
Cross Slide Dimension
12 -300 mm x 22” -560 mm
Cross slide travel
16” -405 mm
Compound slide dimension
17” -430 mm x 7” -175 mm
Compound slide travel
10” -250 mm
Tool post square
7” -175 mm
Tool shank section
1.1/4” -32 mm x 1.1/4” -32 mm
TAIL STOCK :
Spindle ram diameter
3” -75 mm
Spindle ram travel
10”-250 mm
Spindle ram morse taper
MT -5
THREADS :
Number of threads range in metric
13
Number of threads range in inch
19
Number of pitch range in metric
1 to 6 PITCH
Number of pitch range in inch
2 to 24 TPI
Lead screw diameter
1.3/4” -45 mm
Lead screw threads
2 TPI

Special Features

  • Induction harden bed ways.
  • Bed is made from high quality cast iron & strictly inspected with microlevel & straight edge.
  • Head stock spindle is made from high tensile steel duly hardened & ground.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • Tail stock spindle is hardened & ground, made from alloy steel.
  • Meticulous care is taken in selecting the right raw material for every component.
  • Each & every component is passed through strict quality control.
  • Machine accuracy is tested as per IS : 1878 (Part – I) 1971.

Standard Accessories:

Chuck back plate, tool post spanner, Centre adapter, Dead centres – 2 nos, Motor Pulley, Change gear set.

Optional Accessories:

Face plate, Steady rest, Follow rest, Carrier plate, Full or Semi Norton gear box, Rear tool post with extended cross slide, Coolant pump with tank & fittings, Taper turning attachment, Machine lamp, Electric Motor, R/f Switch, Motor Vee Belt, Dog chuck, True chuck, Spindle bore (4.1/8” -100mm, 5.1/8” -130mm, 6.1/8” -155mm)

Electrical:

Motor Recommended 7.5 H.P. / 5.5 KW

General Specification
Model Machine Weight
(Approx) Kgs.
Floor Space
(Approx) L x W x H (mm)
HI-CUT-1 4500 kgs. 2500 x 1675 x 1550
HI-CUT-2 4800 kgs. 3100 x 1675 x 1550
HI-CUT-3 5200 kgs. 3400 x 1675 x 1550
HI-CUT-4 5600 kgs. 4000 x 1675 x 1550
HI-CUT-5 6000 kgs. 4600 x 1675 x 1550
HI-CUT-6 6400 kgs. 5200 x 1675 x 1550
HI-CUT-7 6800 kgs. 5800 x 1675 x 1550
HI-CUT-8 7200 kgs. 6400 x 1675 x 1550
HI-CUT-9 7600 kgs. 7000 x 1675 x 1550
HI-CUT-10 8000 kgs. 7600 x 1675 x 1550
HI-CUT-11 8500 kgs. 8300 x 1675 x 1550
HI-CUT-12 8500 kgs. 8800 x 1675 x 1550