MODEL
HDGH
EHDGH
HI-CUT-GH
Capacity
Center height
10”-250mm
12”-300mm
12”-300mm
15”-380mm
16”-405mm
18”-455mm
Swing over bed
19”-480mm
23”-580mm
23″- -580mm
29”-735mm
30”-760mm
34”-865mm
Swing over Cross slide
11”-280mm
15”-380mm
15”-380mm
21”-530mm
20” -500mm
24″-610mm
Swing in gape
31”-790mm
35”-890mm
35”-890mm
41”-1040mm
46”-1170mm
50”-1270mm
Bed
Bed Length
 Admit Between Center Admit Between Center Admit Between Center
5′ – 6″ – 1675 mm
 22″ – 555 mm 22″ – 555 mm –
7′ – 0 ” – 2135 mm
 39″ – 1000 mm 39″ – 1000 mm 31″ – 800 mm
9′ – 0 ” – 2745 mm
 64″ – 1625 mm 64″ – 1625 mm 54″ – 1370 mm
10′ – 0 ” – 3050 mm
 76″ – 1930 mm 76″ – 1930 mm 66″ – 1680 mm
12′ – 0 ” – 3660 mm
 100″ – 2540 mm 100″ – 2540 mm 90″ – 2280 mm
14′ – 0 ” – 4270 mm
 124″ – 3150 mm 124″ – 3150 mm 114″ – 2900 mm
16′ – 0 ” – 4870 mm
 – 147″ – 3700 mm 138″ – 3500 mm
18′ – 0 ” – 5500 mm
 – 170″ – 4300 mm 162″ – 4100 mm
20′ – 0 ” – 6100 mm
 – 195″ – 4950 mm 186″ – 4700 mm
22′ – 0 ” – 6700 mm
 – – 210″ – 5300 mm
24′ – 0″ – 7300 mm
 – – 234″ – 5900 mm
26′ – 0 ” – 8000 mm
 – – 258″ – 6550 mm
Bed type
 2 V & 2 Flat 2 V & 2 Flat 2 V & 2 Flat
Bed width
 12.3/4″ – 325 mm 15″ – 380 mm 18″ – 455 mm
Length of gape in front of face plate
 8″ – 200 mm 8″ – 200 mm 10″ – 250 mm
Head Stock
Number of spindle speed
 8 8 8
Range of spindle speed
 30 to 1300 RPM 40 to 1050 RPM 20 to 300 RPM
Spindle bore
 2.1/8″ – 54 mm 3.1/8″ – 80 mm 4.1/8″ – 104 mm
Spindle nose
 A2 size 6 A2 size 8 A2 size 8
Carriage & Compound
Cross slide dimension
 8″- 200 mm x 18″ 455 mm 10″ 250 mm x 20″-510 mm 12″-300 mm x 22″-560 mm
Cross slide travel
 10″ – 250 mm 12″ – 300 mm 16″ – 405 mm
Compound slide dimension
 10″-250 mm x 4.3/4″-120 mm 14″-355 mm x 6″-155 mm 17″-430 mm x 7″-175 mm
Compound slide travel
 6″ – 150 mm 8″ – 200 mm 10″ – 250 mm
Tool post square
 4.3/4″ – 120 mm 6″ – 150 mm 7″ – 175 mm
Tool shank section
 1″- 25 mm x 1″-25 mm 1″-25 mm x 1″-25 mm 1.1/4″-32 mm x 1.1/4″-32 mm
Tail Stock
Spindle ram diameter
 2.3/8″ – 60 mm 2.3/8″ – 60 mm 3″ – 75 mm
Spindle ram travel
 8″ – 200 mm 8″ – 200 mm 10″ – 250 mm
Spindle morse taper
 MT – 4 MT – 4 MT – 5
Threads
Number of threads range in metric
 24 24 24
Number of threads range in inch
 44 44 43
Number of pitch range in metric
 0.5 to 15 PITCH 0.5 to 15 PITCH 0.5 to 15 PITCH
Number of pitch range in inch
 2 to 60 TPI 2 to 60 TPI 2 to 60 TPI
Lead screw diameter
 1.1/2″ – 38 mm 1.1/2″ – 38 mm 2 to 60 TPI
Lead screw threads
 4 TPI 4 TPI 2 TPI
Electriacls
Three Phase Motor
 3 H.P / 2.25 KW 5 H.P / 3.7 KW 7.5 H.P / 5.5 KW

Special Features

  • Induction harden bed ways.
  • Bed is made from high quality cast iron & strictly inspected with Micro level & straight edge.
  • Headstock spindle & shafts are made from high tensile steel duly hardened & ground.
  • Headstock gear are made from high tensile steel duly hardened & ground.
  • Tail stock spindle is hardened & ground, made from alloy steel.
  • Norton and Apron Gear Box is totally enclosed oil bath system.
  • Meticulous care is taken in selecting the right raw material for every component. Each & every component is passed
  • through strict quality control.
  • Machine accuracy is tested as per IS : 1878 (Part – I) 1971.

Standard Accessories:

Chuck back plate, Tool Post Spanner, Centre adapter, Dead centers – 2 nos, Full Norton gear box, Electric motor, Motor V-belt, Switch

Optional Accessories:

Face plate, Steady rest, Follow rest, Carrier plate, Rear tool post with extended cross slide, Quick change tool post with tool holder, Taper turning attachment, Machine lamp, Electric control panel, Switch shaft, Foot brake, Coolant pump with tank, Rear splash guard, Dog chuck, True chuck, Revolving centre.