Uncategorized Archives

Drill Machine

Technical Specifications

Description	Model No. PL-40	Model No. PL-40M
Drilling Capacity	40 mm	40 mm
Tapping Capacity	25 mm	25 mm
Face Mill Capacity	125 mm	125 mm
End Mill Capacity	25 mm	25 mm
Boring Capacity	50 mm	50 mm
Column Diameter	127 mm	127 mm
Center of Spindle to Column face	300 mm	300 mm
Distance from Spindle to Table	550 mm	400 mm
Distance form Spindle to Base	1000 mm	1000 mm
Spindle Nose	Threaded type with Morse Taper MT-4	Threaded type with Morse Taper MT-4
Spindle Travel Quill Ram Stock	250 mm	250 mm
Range of feed	Manual	Manual
Range of Spindle Speed	8 (Single 4 & 4 Double)	8 (Single 4 & 4 Double)
Number of Spindle Speed	50 to 1600 RPM	50 to 1600 RPM
Round Table Size	430 mm	–
Table size (W x L)	–	190 x 610 mm
No. of T-Slot	–	2
Table long travel	–	320 mm
Table cross travel	–	200 mm
Table swivel degree	–	30-0-30
Table universal degree	–	90-0-90
Electric Motor	2 HP	2 HP
“V” Belt Driven Cone Pulley	B Section	B Section
Machine Net Weight	450 Kg. Net	500 Kg. Net
Base Plate Size (L X W X H)	820 x 570 x 120 mm	820 x 570 x 120 mm
Over Height with Guard	2030 mm	2030 mm

LDGH

CAPACITY :

Center height	6.1/2″ – 165 MM
Swing over bed	12″ – 305 MM
Swing over Cross slide	7″ – 180 MM
Swing in Gap	20″ – 500 MM

BED :

Bed length	Admit Between Center
LDGH – 1 (4′ – 6″ – 1370 MM)	29″ – 730 MM
LDGH – 2 (6′ – 0″ – 1830 MM)	47″ – 1190 MM
Bed type	2 V & 2 Flat
Bed Width	9.1/2″ – 240 MM
Length of Gap in front of face Plate	4.1/2″ – 115 MM

HEAD STOCK :

Number of Spindle Speed	8
Range of Spindle Speed	65 to 1350 RPM
Spindle Bore	1.1/2″ – 38 mm
Spindle Nose	A 2 Size 4
Spindle Morse Taper (Inside)	MT – 3

CARRIAGE & COMPOUND :

Cross Slide Dimension	6″ – 150 mm x 14″-355 mm
Cross Slide Travel	5.1/4″ – 135 MM
Compound Slide Dimension	4” – 100 mm x 8.3/4”-222 mm
Compound Slide Travel	4.1/2″ – 115 mm
Tool post square	4″ – 100 mm
Tool Shank Section	3/4″ – 19 mm x 3/4″ – 19 mm

TAIL STOCK :

Spindle Diameter	1.1/2″ – 38 mm
Spindle Travel	5″ – 127 mm
Spindle Morse Taper	MT – 3

THREADS :

Number of Threads Range in Metric (mm)	20
Number of Pitch Range in Metric (mm)	0.5 to 7.5 mm
Number of Threads Range in British (inch)	36
Number of pitch Range in British (inch)	4 to 60 TPI
Lead Screw Diameter	1″ – 25.4 mm
Lead Screw Threads	4 TPI


Electrical :
Motor recommended	2 H.P / 1.5 KW

Special Features

Induction harden bed ways.
Bed is made from high quality cast iron & strictly inspected with Micro level & straight edge.
Headstock spindle & shafts are made from high tensile steel duly hardened & ground.
Headstock gear are made from high tensile steel duly hardened & ground.
Tail stock spindle is hardened & ground, made from alloy steel.
Norton and Apron Gear Box is totally enclosed oil bath system.
Meticulous care is taken in selecting the right raw material for every component. Each & every component is passed
through strict quality control.
Machine accuracy is tested as per IS : 1878 (Part – I) 1971.

Standard Accessories:

Chuck back plate, Tool Post Spanner, Centre adapter, Dead centers – 2 nos, Full Norton gear box, Electric motor, Motor V-belt, Switch.

Optional Accessories:

Face plate, Steady rest, Follow rest, Carrier plate, Rear tool post with extended cross slide, Quick change tool post with tool holder, Taper turning attachment, Machine lamp, Electric control panel, Switch shaft, Foot brake, Coolant pump with tank, Rear splash guard, Dog chuck, True chuck, Revolving centre.

MDGH

CAPACITY :

Center height	8.1/2″ – 215 MM
Swing over bed	16″ – 405 MM
Swing over Cross slide	9.1/2″ – 240 MM
Swing in Gap	26″ – 660 MM

BED :

Bed length	Admit Between Center
MDGH – 1 (4′ – 6″ – 1370 MM)	22″ – 555 MM
MDGH – 2 (6′ – 0″ – 1830 MM)	39″ – 1000 MM
Bed type	2 V & 2 Flat
Bed Width	11″ – 280 MM
Length of Gap in front of face Plate	6″ – 150 MM

HEAD STOCK :

Number of Spindle Speed	8
Range of Spindle Speed	65 to 1100 RPM
Spindle Bore	2″ – 50 MM
Spindle Nose : Standard Threaded	A 2 Size 5
Spindle Morse Taper (Inside)	MT – 4

CARRIAGE & COMPOUND :

Cross Slide Dimension	6.3/4″ – 170 MM X 15 -380 MM
Cross Slide Travel	7.1/2″ – 190 MM
Compound Slide Dimension	4” – 100 MM X 10” – 254 MM
Compound Slide Travel	5.1/2″ – 140 MM
Tool post square	4″ – 100 MM
Tool Shank Section	3/4″ – 19 mm x 3/4″ – 19 mm

TAIL STOCK :

Spindle Diameter	2″ – 50 MM
Spindle Travel	6.1/2″ – 165 MM
Spindle Morse Taper	MT – 4

THREADS :

Number of Threads Range in Metric (mm)	20
Number of Pitch Range in Metric (mm)	0.5 to 7.5 MM
Number of Threads Range in British (inch)	36
Number of pitch Range in British (inch)	4 to 60 TPI
Lead Screw Diameter	1.1/4″ – 31.75 MM
Lead Screw Threads	4 TPI

Electrical :

Motor recommended

2 H.P / 1.5 KW

Special Features

Induction harden bed ways.
Bed is made from high quality cast iron & strictly inspected with Micro level & straight edge.
Headstock spindle & shafts are made from high tensile steel duly hardened & ground.
Headstock gear are made from high tensile steel duly hardened & ground.
Tail stock spindle is hardened & ground, made from alloy steel.
Norton and Apron Gear Box is totally enclosed oil bath system.
Meticulous care is taken in selecting the right raw material for every component. Each & every component is passed
through strict quality control.
Machine accuracy is tested as per IS : 1878 (Part – I) 1971.

Standard Accessories:

Chuck back plate, Tool Post Spanner, Centre adapter, Dead centers – 2 nos, Full Norton gear box, Electric motor, Motor V-belt, Switch.

Optional Accessories:

HDGH / EHDGH / HI-CUT-GH

MODEL	HDGH		EHDGH		HI-CUT-GH
Capacity
Center height	10”-250mm	12”-300mm	12”-300mm	15”-380mm	16”-405mm	18”-455mm
Swing over bed	19”-480mm	23”-580mm	23″- -580mm	29”-735mm	30”-760mm	34”-865mm
Swing over Cross slide	11”-280mm	15”-380mm	15”-380mm	21”-530mm	20” -500mm	24″-610mm
Swing in gape	31”-790mm	35”-890mm	35”-890mm	41”-1040mm	46”-1170mm	50”-1270mm
Bed
Bed Length	Admit Between Center		Admit Between Center		Admit Between Center
5′ – 6″ – 1675 mm	22″ – 555 mm		22″ – 555 mm		–
7′ – 0 ” – 2135 mm	39″ – 1000 mm		39″ – 1000 mm		31″ – 800 mm
9′ – 0 ” – 2745 mm	64″ – 1625 mm		64″ – 1625 mm		54″ – 1370 mm
10′ – 0 ” – 3050 mm	76″ – 1930 mm		76″ – 1930 mm		66″ – 1680 mm
12′ – 0 ” – 3660 mm	100″ – 2540 mm		100″ – 2540 mm		90″ – 2280 mm
14′ – 0 ” – 4270 mm	124″ – 3150 mm		124″ – 3150 mm		114″ – 2900 mm
16′ – 0 ” – 4870 mm	–		147″ – 3700 mm		138″ – 3500 mm
18′ – 0 ” – 5500 mm	–		170″ – 4300 mm		162″ – 4100 mm
20′ – 0 ” – 6100 mm	–		195″ – 4950 mm		186″ – 4700 mm
22′ – 0 ” – 6700 mm	–		–		210″ – 5300 mm
24′ – 0″ – 7300 mm	–		–		234″ – 5900 mm
26′ – 0 ” – 8000 mm	–		–		258″ – 6550 mm
Bed type	2 V & 2 Flat		2 V & 2 Flat		2 V & 2 Flat
Bed width	12.3/4″ – 325 mm		15″ – 380 mm		18″ – 455 mm
Length of gape in front of face plate	8″ – 200 mm		8″ – 200 mm		10″ – 250 mm
Head Stock
Number of spindle speed	8		8		8
Range of spindle speed	30 to 1300 RPM		40 to 1050 RPM		20 to 300 RPM
Spindle bore	2.1/8″ – 54 mm		3.1/8″ – 80 mm		4.1/8″ – 104 mm
Spindle nose	A2 size 6		A2 size 8		A2 size 8
Carriage & Compound
Cross slide dimension	8″- 200 mm x 18″ 455 mm		10″ 250 mm x 20″-510 mm		12″-300 mm x 22″-560 mm
Cross slide travel	10″ – 250 mm		12″ – 300 mm		16″ – 405 mm
Compound slide dimension	10″-250 mm x 4.3/4″-120 mm		14″-355 mm x 6″-155 mm		17″-430 mm x 7″-175 mm
Compound slide travel	6″ – 150 mm		8″ – 200 mm		10″ – 250 mm
Tool post square	4.3/4″ – 120 mm		6″ – 150 mm		7″ – 175 mm
Tool shank section	1″- 25 mm x 1″-25 mm		1″-25 mm x 1″-25 mm		1.1/4″-32 mm x 1.1/4″-32 mm
Tail Stock
Spindle ram diameter	2.3/8″ – 60 mm		2.3/8″ – 60 mm		3″ – 75 mm
Spindle ram travel	8″ – 200 mm		8″ – 200 mm		10″ – 250 mm
Spindle morse taper	MT – 4		MT – 4		MT – 5
Threads
Number of threads range in metric	24		24		24
Number of threads range in inch	44		44		43
Number of pitch range in metric	0.5 to 15 PITCH		0.5 to 15 PITCH		0.5 to 15 PITCH
Number of pitch range in inch	2 to 60 TPI		2 to 60 TPI		2 to 60 TPI
Lead screw diameter	1.1/2″ – 38 mm		1.1/2″ – 38 mm		2 to 60 TPI
Lead screw threads	4 TPI		4 TPI		2 TPI
Electriacls
Three Phase Motor	3 H.P / 2.25 KW		5 H.P / 3.7 KW		7.5 H.P / 5.5 KW

Special Features

Induction harden bed ways.
Bed is made from high quality cast iron & strictly inspected with Micro level & straight edge.
Headstock spindle & shafts are made from high tensile steel duly hardened & ground.
Headstock gear are made from high tensile steel duly hardened & ground.
Tail stock spindle is hardened & ground, made from alloy steel.
Norton and Apron Gear Box is totally enclosed oil bath system.
Meticulous care is taken in selecting the right raw material for every component. Each & every component is passed
through strict quality control.
Machine accuracy is tested as per IS : 1878 (Part – I) 1971.

Standard Accessories:

Chuck back plate, Tool Post Spanner, Centre adapter, Dead centers – 2 nos, Full Norton gear box, Electric motor, Motor V-belt, Switch

Optional Accessories:

PL 760/910/1060

Model	PL – 760	PL -910	PL -1060
Capacity
Center Height	28” – 710 mm	34” – 860 mm	40” – 1010 mm
Swing over bed	54” – 1370 mm	66” – 1675 mm	78” – 1980 mm
Swing over cross slide	42” – 1050 mm	54” – 1350 mm	64” – 1625 mm
Swing in gap	76” – 1930 mm	88” – 2235 mm	100” – 2540 mm
Bed
Bed Type	2V & 2Flat (Plano Type)	2V & 2Flat (Plano Type)	2V & 3Flat (Plano Type)
Bed Width	30” – 760 mm	36” – 910 mm	42” – 1060 mm
Length of gape in Front of face plate	12” – 300 mm	12” – 300 mm	12” – 300 mm
Total length of bed	Admit between center	Admit between center	Admit between center
14’ feet / 14’ feet /15’ feet	2000 mm	2000 mm	2000 mm
18’ feet / 18’ feet / 18’ feet	3000 mm	3000 mm	3000 mm
21’ feet / 21’ feet / 21’ feet	4000 mm	4000 mm	4000 mm
24’ feet / 24’ feet / 25’ feet	5000 mm	5000 mm	5000 mm
27’ feet / 27’ feet / 28’ feet	6000 mm	6000 mm	6000 mm
31’ feet / 31’ feet / 31’ feet	7000 mm	7000 mm	7000 mm
Head Stock
Number of spindle speed	6	6	6
Range of spindle speed	10 – 150 RPM	10 – 150 RPM	10 – 150 RPM
Spindle nose dia.	6.1/4” – 160 mm	6.1/4” – 160 mm	6.1/4” – 160 mm
Spindle bore	4” – 100 mm	4.3/4” – 120 mm	4.3/4” – 120 mm
Spindle threads	6 TPI	6 TPI	6 TPI
Taper in spindle sleeve	MT – 6	MT – 6	MT – 6
Carriage & Compound
Cross slide dimension	16”-400 x 28”-710mm	16”-400 x 30”-760 mm	18”-455 x 36”-910 mm
Cross slide travel	28”-710 mm	34”-860 mm	40”-1010 mm
Compound slide dimension	21”-530 x 9”-225 mm	21”-530 x 9″-225 mm	24”-610 x 10” -250 mm
Compound slide travel	12”-300 mm	12”-300 mm	12”-300 mm
Tool post square	9”-228 mm	9”-228 mm	10”-250 mm
Tool shank section	1.1/2”-38mm x 1.1/2”-38mm	1.1/2”-38mm x 1.1/2”-38mm	1.1/2”-38mm x 1.1/2”-38mm
Tail stock
Spindle ram diameter	5” – 125 mm	5” – 125 mm	6” – 150 mm
Spindle ram travel	20” – 500 mm	20” – 500 mm	20” – 500 mm
Taper in tail stock quill	MT – 6	MT – 6	MT – 6
Threads
No. of threads range in metric	24	24	24
No. of threads range in inch	43	43	43
No. of pitch range in metric	0.5 to 15 PITCH	0.5 to 15 PITCH	0.5 to 15 PITCH
No. of pitch range in inch	2 to 60 TPI	2 to 60 TPI	2 to 60 TPI
Lead screw diameter	2” – 50 mm	2” – 50 mm	2” – 50 mm
Lead screw threads	2 TPI	2 TPI	2 TPI
Electricals
Motor Recommanded	10 H.P.	15 H.P.	20 H.P.

Special Features

Induction harden bed ways.
Bed Is Made From High Quality Cast Iron and Strictly Inspected With Micro Level & Straight Edge.
Single Piece Plano Type Solid Bed.
Turcite – B Coated In Saddle & Cross Slide Guideways.
Heavy Duty Headstock, In Which Spindle Runs On One Taper Roller Bearing and One Cylindrical Roller Bearing In
Front &
One Taper Roller Bearing At Rear Side.
Headstock Spindle Is Made From High Tensile Steel Duly Hardened & Ground.
Double Shaft Norton Gear Box & Apron, Which Is Totally Enclosed Oil Bath System With Lever Type Arrangement for
Automatic Feeds.
Sliding Type Counter Assembly For Easy Changing Of V-belt From One Step To Another Step.
Tail Stock Spindle Is Hardened & Ground, Made From Alloy Steel.
Meticulous Care is Taken in Selecting The Right Raw Material For Every Component. Each & Every Component Is
Passed
Through Strict Quality Control.
Machine Accuracy Is Tested As Per Is : 1878 (part – I) 1971.

Standard Accessories:

Chuck Back Plate, Tool Post Spanner, Motor Pulley, Motor Channel, Change Gear Set, Fix Spanner Set, Allen Key Set & Oil Cane.

Optional Accessories:

Face Plate, Steady Rest, Follow Rest, Carrier Plate, Rear Tool Post With Extended Cross Slide, Coolant Pump with Tank And Fittings, Taper Turning Attachment, Machine Lamp, Electric Motor, R/F Switch, Motor V- Belt, Dog Chuck, True Chuck, Customized Center Height of Machine.

PL 510/610

Model	PL – 510	PL – 610
Capacity
Center Height	18” – 455 mm	22” – 560 mm
Swing over bed	35” – 890 mm	43” – 1090 mm
Swing over cross slide	24” – 610 mm	30” – 760 mm
Swing in gap	50” – 1270 mm	58” – 1470 mm
Bed
Bed Type	2V & 2Flat (Plano Type)	2V & 2Flat (Plano Type)
Bed Width	20” – 508 mm	24” – 610 mm
Length of gape in Front of face plate	10” – 250 mm	10” – 250 mm
Total length of bed	Admit between center	Admit between center
12’ feet / 14’ feet	2000 mm	2000 mm
16’ feet / 17’ feet	3000 mm	3000 mm
19’ feet / 20’ feet	4000 mm	4000 mm
22’ feet / 24’ feet	5000 mm	5000 mm
26’ feet / 27’ feet	6000 mm	6000 mm
29’ feet / 30’ feet	7000 mm	7000 mm
Head Stock
Number of spindle speed	6	6
Range of spindle speed	20 – 200 RPM	10 – 150 RPM
Spindle nose dia.	5” – 130 mm	6.1/4” – 160 mm
Spindle bore	4” – 100 mm	4.3/4” – 120 mm
Spindle threads	6 TPI	6 TPI
Taper in spindle sleeve	MT – 5	MT – 6
Carriage & compound
Cross slide dimension	12” – 300mm x 22” – 560mm	12” – 300mm x 24” – 610mm
Cross slide travel	18” – 455 mm	22” – 560 mm
Compound slide dimension	17” – 430 mm x 7” – 175 mm	17” – 430 mm x 7” – 175 mm
Compound slide travel	10” – 250 mm	10” – 250 mm
Tool post square	7” – 175 mm	7” – 175 mm
Tool shank section	1.1/4”-32mm x 1.1/4”-32mm	1.1/4”-32mm x 1.1/4”-32 mm
Tail stock
Spindle ram diameter	3.1/2” – 90 mm	5” – 125 mm
Spindle ram travel	10” – 250 mm	18” – 450 mm
Taper in tail stock quill	MT – 5	MT – 6
Threads
No. of threads range in metric	24	24
No. of threads range in inch	43	43
No. of pitch range in metric	0.5 to 15 PITCH	0.5 to 15 PITCH
No. of pitch range in inch	2 to 60 TPI	2 to 60 TPI
Lead screw diameter	1.3/4” – 45 mm	2” – 50 mm
Lead screw threads	2 TPI	2 TPI
Electricals
Motor Recommanded	5 H.P. / 1000 RPM	7.5 H.P. / 1000 RPM

Special Features

Induction harden bed ways.
Bed Is Made From High Quality Cast Iron and
Strictly Inspected With Micro Level & Straight Edge.
Single Piece Plano Type Solid Bed.
Turcite – B Coated In Saddle & Cross Slide Guideways.
Heavy Duty Headstock, In Which Spindle Runs On One Taper Roller Bearing and One Cylindrical Roller Bearing In
Front &
One Taper Roller Bearing At Rear Side.
Headstock Spindle Is Made From High Tensile Steel Duly Hardened & Ground.
Double Shaft Norton Gear Box & Apron, Which Is Totally Enclosed Oil Bath System With Lever Type Arrangement for
Automatic Feeds.
Sliding Type Counter Assembly For Easy Changing Of V-belt From One Step To Another Step.
Tail Stock Spindle Is Hardened & Ground, Made From Alloy Steel.
Meticulous Care is Taken in Selecting The Right Raw Material For Every Component. Each & Every Component Is
Passed
Through Strict Quality Control.
Machine Accuracy Is Tested As Per Is : 1878 (part – I) 1971.

Standard Accessories:

Chuck Back Plate, Tool Post Spanner, Motor Pulley, Motor Channel, Change Gear Set, Fix Spanner Set, Allen Key Set & Oil Cane.Chuck Back Plate, Tool Post Spanner, Motor Pulley, Motor Channel, Change Gear Set, Fix Spanner Set, Allen Key Set & Oil Cane.

Optional Accessories:

General Specification

MODEL	Machine Weight (Approx) Kgs.	Floor Space (Approx) L x W x H
PL-510 / 2000	4000 Kgs.	4000 x 1675 x 1550 mm
PL-510 / 3000	4700 Kgs.	5200 x 1675 x 1550 mm
PL-510 / 4000	5400 Kgs.	6100 x 1675 x 1550 mm
PL-510 / 5000	6000 Kgs.	7000 x 1675 x 1550 mm
PL-510 / 6000	6700 Kgs.	8200 x 1675 x 1550 mm
PL-510 / 7000	7500 Kgs.	9200 x 1675 x 1550 mm

MODEL	Machine Weight (Approx) Kgs.	Floor Space (Approx) L x W x H
PL-610 / 2000	6100 Kgs.	4600 x 1800 x 1600 mm
PL-610 / 3000	6700 Kgs.	5500 x 1800 x 1600 mm
PL-610 / 4000	7400 Kgs.	6400 x 1800 x 1600 mm
PL-610 / 5000	8100 Kgs.	7600 x 1800 x 1600 mm
PL-610 / 6000	8700 Kgs.	8600 x 1800 x 1600 mm
PL-610 / 7000	9300 Kgs.	9500 x 1800 x 1600 mm

Hi-Cut Lathe Machine

CAPACITY:	Standard Center height 16” – 405 mm	Optional Center height 18” – 455 mm
Center height	16” -405mm	18” -455mm
Swing over bed	30” -460mm	34” -865mm
Swing over Cross slide	20” -500mm	24” -610mm
Swing in gape	46” -1170mm	50” -1270mm

BED :

Bed Lengh	Admit Between Center
HI-CUT-1 (7’-0” – 2235 mm)	31” – 800 mm
HI-CUT-2 (9’-0” – 2745 mm)	54” -1370 mm
HI-CUT-3 (10’-0” – 3050 mm)	66” -1680 mm
HI-CUT-4 (12’-0” – 3660 mm)	90” -2280 mm
HI-CUT-5 (14’-0” – 4270 mm)	114” -2900 mm
HI-CUT-6 (16’-0” – 4875 mm)	138” -3500 mm
HI-CUT-7 (18’-0” – 5485 mm)	162” -4100 mm
HI-CUT-8 (20’-0” – 6100 mm)	186” -4700 mm
HI-CUT-9 (22’-0” – 6700 mm)	210” -5300 mm
HI-CUT-10 (24’-0” – 7300 mm)	234” -5900 mm
HI-CUT-11 (26’-0” – 8000 mm)	258” -6550 mm
HI-CUT-11 (28’-0” – 8500 mm)	282” -7150 mm
Bed type	2V & 2 Flat
Bed width	18” -455 mm
Lenght of gape in front of face plate	10”- 250 mm

HEAD STOCK :

Number of spindle speed	8
Range of spindle speed	30 to 250 RPM
Spindle nose dia.	4” -100 mm
Spindle bore	3.1/8” -80 mm
Spindle threads	6 TPI
Spindle morse taper (Inside)	MT – 4

CARRIAGE & COMPOUND :

Cross Slide Dimension	12 -300 mm x 22” -560 mm
Cross slide travel	16” -405 mm
Compound slide dimension	17” -430 mm x 7” -175 mm
Compound slide travel	10” -250 mm
Tool post square	7” -175 mm
Tool shank section	1.1/4” -32 mm x 1.1/4” -32 mm

TAIL STOCK :

Spindle ram diameter	3” -75 mm
Spindle ram travel	10”-250 mm
Spindle ram morse taper	MT -5

THREADS :

Number of threads range in metric	13
Number of threads range in inch	19
Number of pitch range in metric	1 to 6 PITCH
Number of pitch range in inch	2 to 24 TPI
Lead screw diameter	1.3/4” -45 mm
Lead screw threads	2 TPI

Special Features

Induction harden bed ways.
Bed is made from high quality cast iron & strictly inspected with microlevel & straight edge.
Head stock spindle is made from high tensile steel duly hardened & ground.
Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
Tail stock spindle is hardened & ground, made from alloy steel.
Meticulous care is taken in selecting the right raw material for every component.
Each & every component is passed through strict quality control.
Machine accuracy is tested as per IS : 1878 (Part – I) 1971.

Standard Accessories:

Chuck back plate, tool post spanner, Centre adapter, Dead centres – 2 nos, Motor Pulley, Change gear set.

Optional Accessories:

Face plate, Steady rest, Follow rest, Carrier plate, Full or Semi Norton gear box, Rear tool post with extended cross slide, Coolant pump with tank & fittings, Taper turning attachment, Machine lamp, Electric Motor, R/f Switch, Motor Vee Belt, Dog chuck, True chuck, Spindle bore (4.1/8” -100mm, 5.1/8” -130mm, 6.1/8” -155mm)

Electrical:

Motor Recommended 7.5 H.P. / 5.5 KW

General Specification
Model	Machine Weight (Approx) Kgs.	Floor Space (Approx) L x W x H (mm)
HI-CUT-1	4500 kgs.	2500 x 1675 x 1550
HI-CUT-2	4800 kgs.	3100 x 1675 x 1550
HI-CUT-3	5200 kgs.	3400 x 1675 x 1550
HI-CUT-4	5600 kgs.	4000 x 1675 x 1550
HI-CUT-5	6000 kgs.	4600 x 1675 x 1550
HI-CUT-6	6400 kgs.	5200 x 1675 x 1550
HI-CUT-7	6800 kgs.	5800 x 1675 x 1550
HI-CUT-8	7200 kgs.	6400 x 1675 x 1550
HI-CUT-9	7600 kgs.	7000 x 1675 x 1550
HI-CUT-10	8000 kgs.	7600 x 1675 x 1550
HI-CUT-11	8500 kgs.	8300 x 1675 x 1550
HI-CUT-12	8500 kgs.	8800 x 1675 x 1550

Extra Heavy Duty Lathe Machine

Capacity :
	Standard Center height 13”-330 mm	Optional Center height 15”-380 mm
Center height	13” -330 mm	15” -380 mm
Swing over bed	25” -635 mm	29” -735 mm
Swing over Cross slide	17” -430 mm	21” -530 mm
Swing in gape	37” -94 0mm	41” -1040 mm

Bed :

Bed Lengh	Admit Between Center
EHD-1 (5’-6” – 1675 mm)	22” – 555 mm
EHD-2 (7’-0” – 2135 mm)	39” -1000 mm
EHD-3 (9’-0” – 2745 mm)	64” -1625 mm
EHD-4 (10’-0” – 3050 mm)	76” -1930 mm
EHD-5 (12’-0” – 3660 mm)	100” -2540 mm
EHD-6 (14’-0” – 4270 mm)	124” -3150 mm
EHD-7 (16’-0” – 4875 mm)	147” -3700 mm
EHD-8 (18’-0” – 5485 mm)	170” -4300 mm
EHD-9 (20’-0” – 6100 mm)	195” -4900 mm
Bed type	2V & 2 Flat
Bed width	15” -380 mm
Lenght of gape in front of face plate	8”- 200 mm

Head Stock :

Number of spindle speed	8
Range of spindle speed	30 to 490 RPM
Spindle nose dia.	3” -76 mm
Spindle bore	2.1/8” -52 mm
Spindle threads	6 TPI
Spindle morse taper (Inside)	Mt – 4

Carriage & Compound :

Cross Slide Dimension	10 -250 mm x 20” -510 mm
Cross slide travel	13” -330 mm
Compound slide dimension	14” -355 mm x 6” -155 mm
Compound slide travel	8” -200 mm
Tool post square	6” -150 mm
Tool shank section	1” -25mm x 1” -25 mm

Tail Stock :

Spindle ram diameter	2.3/4” -70 mm
Spindle ram travel	8”-200 mm
Spindle ram morse taper	MT -4

Threads :

Number of threads range in metric	13
Number of threads range in inch	19
Number of pitch range in metric	1 to 6 PITCH
Number of pitch range in inch	2 to 24 TPI
Lead screw diameter	1.1/2” -38 mm
Lead screw threads	4 TPI

Special Features

Induction harden bed ways.
Bed is made from high quality cast iron & strictly inspected with microlevel & straight edge.
Headstock spindle is made from high tensile steel duly hardened & ground.
Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
Tail stock spindle is hardened & ground, made from alloy steel.
Meticulous care is taken in selecting the right raw material for every component.
Each & every component is passed through strict quality control.
Machine accuracy is tested as per IS : 1878 (Part – I) 1971.

Standard Accessories:

Chuck back plate, tool post spanner, Centre adapter, Dead centres – 2 nos, Motor Pulley, Change gear set.

Optional Accessories:

Electrical:

Motor Recommended 5 H.P. / 3.7 KW

General Specification

Model	Machine Weight (Approx) Kgs.	Floor Space (Approx) L x W x H (mm)
EHD-1	1450 kgs.	2000 x 1150 x 1650
EHD-2	1650 kgs.	2450 x 1150 x 1650
EHD-3	1750 kgs.	3000 x 1150 x 1650
EHD-4	1950 kgs.	3450 x 1150 x 1650
EHD-5	2150 kgs.	4100 x 1150 x 1650
EHD-6	2550 kgs.	4750 x 1150 x 1650
EHD-7	2950 kgs.	5350 x 1150 x 1650
EHD-8	3450 kgs.	6100 x 1150 x 1650
EHD-9	3950 kgs.	6400 x 1150 x 1650

Heavy Duty Lathe Machine

Capacity	Standard Center height 10” – 250 mm	Optional Center height 12” – 300 mm
Center height	10” -250 mm	12” -300 mm
Swing over bed	19” -480 mm	23” -580 mm
Swing over Cross slide	11” -280 mm	15” -380 mm
Swing in gape	31” -790 mm	35” -890 mm

Bed

Bed Lengh	Admit Between Center
HD-1 (5 ‘-’6” – 1675 mm)	22” – 555 mm
HD-2 (7’ -0” – 2135mm)	39” -1000 mm
HD-3 (9 – ’0” – 2745 mm)	64” -1625 mm
HD-4 (10’ -0” – 3050 mm)	76” -1930 mm
HD-5 (12′ -’0” – 3660 mm)	100” -2540 mm
HD-6 (14’ -0” – 4270 mm)	124” -3150 mm
Bed type	2V & 2 Flat
Bed width	12.3/4” -325 mm
Lenght of gape in front of face plate	8”- 200 mm

Head Stock

Number of spindle speed	8
Range of spindle speed	30 to 490 RPM
Spindle nose dia.	3” -76 mm
Spindle bore	2.1/8” -52 mm
Spindle threads	6 TPI
Spindle morse taper (Inside)	MT – 4

Carriage & Compound

Cross Slide Dimension	8” -200 mm x 18” -455 mm
Cross slide travel	10” -250 mm
Compound slide dimension	10” -250 mm x 4.3/4” -120 mm
Compound slide travel	6” -150 mm
Tool post square	4.3/4” -120 mm
Tool shank section	1” -25 mm x 1” -25 mm

Tail Stock

Spindle ram diameter	2.3/4” -70 mm
Spindle ram travel	8”-200 mm
Spindle ram morse taper	MT -4

Threads

Number of threads range in metric	13
Number of threads range in inch	19
Number of pitch range in metric	1 to 6 PITCH
Number of pitch range in inch	2 to 24 TPI
Lead screw diameter	1.1/2” -38 mm
Lead screw threads	4 TPI

Special Features

Induction harden bed ways.
Bed is made from high quality cast iron & strictly inspected with microlevel & straight edge.
Head stock spindle is made from high tensile steel duly hardened & ground.
Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
Tail stock spindle is hardened & ground, made from alloy steel.
Meticulous care is taken in selecting the right raw material for every component.
Each & every component is passed through strict quality control.
Machine accuracy is tested as per IS : 1878 (Part – I) 1971.

Standard Accessories:

Chuck back plate, tool post spanner, Centre adapter, Dead centres – 2 nos, Motor Pulley, Change gear set.

Optional Accessories:

Face plate, Steady rest, Follow rest, Carrier plate, Full or Semi Norton gear box, Rear tool post, Coolant pump with tank & fittings, Taper turning attachment, Machine lamp, Electric Motor, R/f Switch, Motor Vee Belt, Dog chuck, True chuck, Spindle bore (3.1/8” -80mm, 4.1/8” -100mm)

Electrical:

Motor Recommended 3 H.P. / 2.25 KW

General Specification

Model	Machine Weight (Approx) Kgs.	Floor Space (Approx) L x W x H (mm)
HD-1	1200 kgs.	2000 x 1070 x 1450
HD-2	1350 kgs.	2450 x 1070 x 1450
HD-3	1450 kgs.	3000 x 1070 x 1450
HD-4	1600 kgs.	3450 x 1070 x 1450
HD-5	1800 kgs.	4100 x 1070 x 1450
HD-6	2200 kgs.	4750 x 1070 x 1450

Medium Duty Lathe Machine

CAPACITY :	Standard	Optional
Center height	8.1/2″ – 215 mm	10″ – 254 mm
Swing over bed	16″ – 405 mm	19″ – 480 mm
Swing over Cross slide	9.1/2″ – 240 mm	12.1/2″ – 315 mm
Swing in Gap	26” – 660 mm	29” – 735 mm

BED :

Bed Lengh	Admit Between Center
MD – 1 (4′ – 6″ – 1370 mm)	22″ – 555 mm
MD – 2 (6′ – 0″ – 1830 mm)	39″ – 1000 mm
Bed type	2 V & 2 Flat
Bed Width	11″ – 280 mm
Length of Gap in front of face Plate	6″ – 150 mm

HEAD STOCK :

Number of Spindle Speed	6	6
Range of Spindle Speed	40 to 550 RPM	40 to 550 RPM
Spindle Bore	2″ – 50 mm	3.1/8″ – 80 mm
Spindle Threads	6 TPI	6 TPI
Spindle Morse Taper (Inside)	MT – 4	MT – 4

CARRIAGE & COMPOUND :

Cross Slide Dimension	6.3/4″ – 170 mm X 15″ – 380 mm
Cross Slide Travel	7.1/2″ – 190 mm
Compound Slide Dimension	4” – 100 mm X 10” – 254 mm
Compound Slide Travel	5.1/2″ – 140 mm
Tool post square	4″ – 100 mm
Tool Shank Section	3/4″ – 19 mm x 3/4″ – 19 mm

TAIL STOCK :

Spindle Diameter	2″ – 50 mm
Spindle Travel	6.1/2″ – 165 mm
Spindle Morse Taper	MT – 4

THREADS :

Number of Threads Range in Metric	21
Number of Threads Range in Inch	29
Number of Pitch Range in Metric	0.5 to 7 PITCH
Number of pitch Range in Inch	4 to 48 TPI
Lead Screw Diameter	1.1/4″ – 31.75 mm
Lead Screw Threads	4 TPI

Chuck Back Plate, Tool Post Spanner, Centre Adapter, Dead Centers – 2 Nos, Motor Pulley, Change Gear Set

Optional Accessories :

Face Plate, Steady Rest, Follow Rest, Carrier Plate, Full Or Semi Norton Gear Box, Rear Tool Post With Extended Cross Slide,
Coolant Pump With Tank And Fittings, Taper Turning Attachment,
Machine Lamp, Electric Motor, R/f Switch, Motor V-belt, Dog Chuck, True Chuck

Electrical :

Motor Recommended 2 H.P. / 1.5 KW